Home » Services » Electrician » Garage Wiring & Power Installation

Garage Wiring and Power Installation in Duluth, MN

Power and light for the garage you actually use

Power for a real workshop: 240-volt outlets, a heater circuit, bright lights and outlets where the bench is. Planned with you, so the garage is wired once.

Call (715) 817-2419 Request a Consultation

2×Best of the Best winner, Best Contractor 2024 & 2025 (Duluth News Tribune readers' choice)
4.9stars on Google from 125+ reviews
25+years of combined experience on our crew
Cleancareful, respectful crews in your home

Garage Wiring and Power Installation Services

Garage wiring in Duluth, from Heyday Home Solutions, means circuits sized for what you'll run out there: 240-volt outlets for a welder, compressor or heater, GFCI outlets along the walls and bright lighting. For a detached garage it often starts with a subpanel. Cory Hesselgrave, our electrician, does the work. Call (715) 817-2419 or ask for a free quote.

Call (715) 817-2419 Request a Consultation

What is involved

What garage wiring involves, step by step

List what you'll run.

A heater, a welder, a compressor, a freezer, an EV charger, power tools. The list sets the size of everything else.

Check the house panel.

It has to carry the garage on top of the house.

Feed the garage.

An attached garage may run off new circuits from the house panel. A detached one usually gets a feeder and its own subpanel, buried or run overhead.

Lay out outlets and lights.

Outlets at bench height where you work, 240-volt outlets where the big tools sit, and lights over the bench and the doors.

Wire, connect and test,

with GFCI protection on the garage outlets.

New garage and workshop on the outskirts of Superior, WI

Recent project

A garage we built near Superior

On the outskirts of Superior, we built a new garage and workshop big enough to store recreational vehicles and still work in. See the garage and workshop build.

See the full project

Cost

What garage wiring costs, and what moves the price

Distance and load set most of the price. A few outlets and lights in an attached garage, near the panel, is a short job. A detached garage 60 feet away with a subpanel, a heater circuit and a 240-volt welder outlet means a trench or an overhead line, plus more wire and breakers. Finished walls take longer to wire than open studs.

Get a Written Estimate

Signs it is time

Does your garage need its own circuit?

It does if you want to run a heater, a compressor or a welder, or keep a freezer out there.

It also does if the garage shares one 15-amp circuit with the house. Watch for a breaker that trips when the space heater and a saw run together, or for extension cords strung from one outlet. A Duluth winter makes this worse, because the heater is on for months. A garage with its own circuits, or a subpanel, stops the trips and keeps the house circuits free.

Hiring an electrician for your garage: 240V, lights and outlets

Hire an electrician for your garage when you need 240 volts, a subpanel or a new feed from the house. Those are the jobs that usually need a permit and an inspection, and the ones that go wrong when guessed at. A 240-volt outlet has to match the tool's plug and amps; a welder and a heater rarely use the same one. Plan the lights for the work, not just the parking: over the bench, the doors and wherever you'll be on your back under a car. Bring your list of tools to the estimate and we'll size the garage to it, with room for what you might add later.

Custom TV mantel and built-in shelving in a Congdon Boulevard home in Duluth

The Heyday experience

How we run your project

  1. Walk-throughGrant Gilbertson, our estimator, meets you at the house, looks at the space and listens to what you want.
  2. A plan you understandWe take the time to explain your options and answer questions, so you feel confident before work starts.
  3. A careful crewOur team shows up on schedule, works cleanly and respectfully, and keeps you posted as the job moves.
  4. Finished rightAttention to detail through the finish, and we stand behind our work.

Cost or an insurance claim holding you up?

Two things we help with before the work starts: paying for it over time, and getting an insurance claim through to a finished repair.

Build now, pay over time.

Financing runs through Acorn. You answer a few questions, compare loan offers from several lenders in one place, and apply with the one you choose. The loan is between you and that lender: we don’t issue it, and Acorn doesn’t pay us.

  • Offers from several lenders, side by side
  • Monthly payments instead of one large bill
  • No obligation to apply

We deal with the adjusters so you don't have to.

After storm or water damage, call your insurer first so they can assign an adjuster. Once the area is dried out and safe, we assess everything that needs rebuilding, including damage that only shows after cleanup, and write the estimate in the format adjusters work from. Their questions, any supplements and the approvals go through us. Then we schedule the rebuild.

What clients say

4.9 stars from 125+ Google reviews

Read the reviews on Google
★★★★★
We had a very good experience with Heyday. They completely gutted and remodeled our master bathroom. I loved working with Amanda on the planning.
Shirley PommervilleMaster bathroom remodel · Google review
★★★★★
The crew at Heyday did a fantastic job on our new roof! The cleanup afterwards was impeccable, and the communication from management was top-notch!
Jenna CavallinNew roof · Google review
★★★★★
Josh and his crew are terrific. The quality of their work is first rate - whether it be new construction or repair work or trouble shooting.
Joseph HartlNew construction and repairs · Google review

Common questions

Does a detached garage need a subpanel?

Usually, if you want more than a light and an outlet or two. A subpanel lets the garage have several circuits, including 240-volt ones, fed by one line from the house. It also gives you breakers in the garage, so you can reset one without walking to the basement. We size it to your tool list.

Can you put in a 240-volt outlet for a welder or heater?

Yes. The outlet, wire and breaker are matched to the tool's nameplate, so bring the model or a photo of the label to the estimate. A welder and a garage heater often need different outlets and amps. If the panel is already full, we'll tell you what it takes to make room.

Are GFCI outlets required in a garage?

Yes. Current code calls for GFCI protection on garage outlets, because garages are damp and have concrete floors. That includes the outlet you'd plug a freezer into. Older garages often have none, so we add it when we rewire, either at the outlet or at the breaker.

What is working with Heyday like?

We plan the job with you first: what you'll run, where the bench goes and what your panel can carry. We explain the options so you can choose with confidence. Cory Hesselgrave, our electrician, does the wiring, and we show up when we say we will and work cleanly.

Your project

Planning something significant? Start with a walk-through.

We will look at the space with you, listen to what you want, and explain your options before anything is decided.

Call (715) 817-2419 Request a Consultation

Call (715) 817-2419Free Quote