Bright, even light right where you chop
Hardwired LED light under your cabinets, on a wall switch or dimmer, with the wires hidden. Best planned with the kitchen, so it goes in before the backsplash.
Under-Cabinet Lighting Services
Under-cabinet lighting installation in Duluth, from Heyday Home Solutions, means hardwired LED strips or puck lights under your upper cabinets, on a wall switch or dimmer, with no cords showing. Cory Hesselgrave, our electrician, wires it, usually as part of a kitchen remodel. Call (715) 817-2419 or ask for a free quote.
What is involved
A continuous LED strip gives an even line of light on the counter. Pucks give pools of light. Pick a color temperature that matches the room's other lights.
Most LED systems run on low voltage through a small driver. The driver hides inside a cabinet or above it, and the switch goes where you'd reach for it.
A new feed comes from a nearby circuit to the switch, then to the driver. In a remodel, this happens with the walls open, before the backsplash.
toward the front edge of the cabinet bottom, so the light falls on the counter and not on the backsplash alone.
in the cabinet's recess or a small channel, then test the dimmer for flicker.

Recent project
In Congdon, we remodeled a home's main level, kitchen included, and rewired it while the walls were open. The kitchen got new disc lighting and pendant fixtures. See the Congdon kitchen and electrical project.
Cost
The biggest factor is whether the walls are open. During a kitchen remodel the wire runs before the backsplash, and the cost is mostly the lights. In a finished kitchen, getting power to the switch means fishing wire through the wall, and maybe removing and resetting some backsplash. The length of cabinet run, strip or puck, and a dimmer move the rest.
Signs it is time
They also leave a cord running to an outlet on your backsplash, and they take up that outlet. Hardwired lights run from a wall switch with no cords and leave every outlet free. For a new or remodeled kitchen, hardwired is the right choice. For a rental or a kitchen you'll redo in two years, plug-in is fine.
If you're looking for under-cabinet lighting installation near you in Duluth or Superior, we install hardwired systems. A plug-in strip is a job you can do yourself in an afternoon. A light that switches on with the others and hides its wiring needs an electrician, and it's the kind we put in. We do most of it during kitchen remodels, which is the cheapest time. A retrofit in a finished kitchen works too; it just takes more care getting power to the switch.

The Heyday experience
Two things we help with before the work starts: paying for it over time, and getting an insurance claim through to a finished repair.
Financing runs through Acorn. You answer a few questions, compare loan offers from several lenders in one place, and apply with the one you choose. The loan is between you and that lender: we don’t issue it, and Acorn doesn’t pay us.
After storm or water damage, call your insurer first so they can assign an adjuster. Once the area is dried out and safe, we assess everything that needs rebuilding, including damage that only shows after cleanup, and write the estimate in the format adjusters work from. Their questions, any supplements and the approvals go through us. Then we schedule the rebuild.
What clients say
We had a very good experience with Heyday. They completely gutted and remodeled our master bathroom. I loved working with Amanda on the planning.
The crew at Heyday did a fantastic job on our new roof! The cleanup afterwards was impeccable, and the communication from management was top-notch!
Josh and his crew are terrific. The quality of their work is first rate - whether it be new construction or repair work or trouble shooting.
No. The lights mount to the underside of the upper cabinets with small screws or clips, and the wires run in the recess or a slim channel. If the driver goes inside a cabinet, it takes a small hole for the wire, out of sight. In a finished kitchen, the bigger job is getting power to the switch, not the cabinets.
Yes, if the driver and the dimmer are made to work together. A mismatched dimmer makes LEDs flicker or hum, so we pick them as a pair. Dimmed under-cabinet light also works well as a night light in the kitchen. Some systems can join a smart switch or app, too.
Strips give one even line of light along the counter, with no bright spots. Pucks make pools of light and look more traditional. For a counter you work on, most people prefer strips. Under glass-front cabinets or open shelves, pucks can look better. We can show you both before you choose.
We plan the lighting with the rest of your kitchen, before work starts, and explain the choices so you can decide with confidence. Cory Hesselgrave, our electrician, does the wiring. We show up when we say we will and work cleanly in your kitchen.
Your project
We will look at the space with you, listen to what you want, and explain your options before anything is decided.