A soft glow above the cabinets, wired in
LED light on top of your upper cabinets that washes the ceiling with a soft glow. Wired to a wall switch, planned with the rest of the kitchen.
Over-Cabinet Lighting Services
Over-cabinet lighting in Duluth, from Heyday Home Solutions, is an LED strip on top of your upper cabinets that lights the ceiling and gives the kitchen a soft glow in the evening. It's wired to a wall switch or dimmer, with the strip and wires out of sight. Cory Hesselgrave, our electrician, installs it, most often as part of a kitchen remodel. Call (715) 817-2419 or ask for a free quote.
What is involved
The space between the cabinet tops and the ceiling decides whether this works. A gap of 12 inches or more gives the light room to spread. A few inches gives a hot stripe on the ceiling.
It sits behind the cabinet's crown or a small lip at the front edge, angled up, so you see the glow and not the LEDs.
A small driver hides on top of a cabinet, fed from a wall switch.
the dimmer, then set the strips back far enough that no dots show on the ceiling.

Recent project
In Congdon, we remodeled a home's main level and rewired it while the walls were open. The kitchen got new disc lighting and pendant fixtures. See the Congdon kitchen and electrical project.
Cost
Over-cabinet lighting is one of the smaller lighting jobs in a kitchen. The length of cabinet run and getting power to a switch set most of the price. If the kitchen is being remodeled, the wire runs while the walls are open. In a finished kitchen, power often comes from an outlet or light circuit nearby. Adding it at the same time as under-cabinet lights saves a second trip.
Signs it is time
The best above-cabinet lighting lights the ceiling, not the tops of the cabinets. Point the strip up and hide it behind a lip, and you see a soft wash with no dots. Point it out and you light every bit of dust up there. A warm color, around 2700 to 3000K, reads as calm in the evening. A white or light ceiling bounces the most light back down; a dark one swallows it. Put it on its own switch or dimmer, so it can stay on low when the main lights are off. If you also want task light on the counter, pair it with under-cabinet lighting.

The Heyday experience
Two things we help with before the work starts: paying for it over time, and getting an insurance claim through to a finished repair.
Financing runs through Acorn. You answer a few questions, compare loan offers from several lenders in one place, and apply with the one you choose. The loan is between you and that lender: we don’t issue it, and Acorn doesn’t pay us.
After storm or water damage, call your insurer first so they can assign an adjuster. Once the area is dried out and safe, we assess everything that needs rebuilding, including damage that only shows after cleanup, and write the estimate in the format adjusters work from. Their questions, any supplements and the approvals go through us. Then we schedule the rebuild.
What clients say
We had a very good experience with Heyday. They completely gutted and remodeled our master bathroom. I loved working with Amanda on the planning.
The crew at Heyday did a fantastic job on our new roof! The cleanup afterwards was impeccable, and the communication from management was top-notch!
Josh and his crew are terrific. The quality of their work is first rate - whether it be new construction or repair work or trouble shooting.
No. Under-cabinet lights shine down on the counter, for working. Over-cabinet lights sit on top of the cabinets and shine up at the ceiling, for a soft glow across the room. Many kitchens have both on separate switches. They're often wired at the same time, which saves a trip.
About a foot or more works best. With 12 inches or more, the light spreads into an even wash on the ceiling. With only a few inches, it makes a bright stripe. If your cabinets reach the ceiling, over-cabinet lighting isn't an option, and lights inside glass-front cabinets may suit you better.
Not if it's set up right. The strip sits behind a lip or the cabinet's crown and points up, so you see the glow on the ceiling, not the LEDs. Pointing the light at the ceiling also keeps it off the cabinet tops, where dust collects.
We plan the lighting with you before work starts and explain the options, so you know what the room will look like at night. Cory Hesselgrave, our electrician, does the wiring. We show up when we say we will and work cleanly in your kitchen.
Your project
We will look at the space with you, listen to what you want, and explain your options before anything is decided.